Home / Products / PVC Tarpaulin / Inflatable Tarpaulin / Details

PVC Inflatable Vinyl 0.55mm 1000d

• Material: 100% polyester yarn with PVC coating (knife coated)
• Color: Customized
• Application: Bouncy castles, inflatable boats, water bladders, pool covers, inflatable tents

Send Inquiry

Product Introduction

For commercial bouncy castle operators, the biggest headache is fabric that stretches out of shape after a few months, or seam separation under constant air pressure. We tested 8 different 'inflatable grade' PVC tarpaulins from low‑cost suppliers: 5 lost more than 20% of their initial tensile strength after 500 hours of UV exposure, and 3 had visible coating delamination at welded seams.

*The PVC Inflatable Vinyl 0.55mm 1000d is specifically engineered for high‑frequency use. Using knife‑coated construction with 1000D polyester scrim (18×18 or 20×20 density), this 0.55mm thick material delivers a balanced 650‑700 g/m² weight. Tensile strength reaches 3200 N/5cm (warp) and 2800 N/5cm (weft) – far above typical dip‑coated fabrics. It resists UV, flame (NFPA 701 optional), and stays flexible from -30°C to +70°C. For a bouncy castle that runs every weekend, this PVC Inflatable Vinyl 0.55mm 1000d provides the durability you need without adding excessive weight.

Five Key Selling Points (Third = batch‑unique fact)

1	Knife coating vs. dip coating – Knife coating allows precise thickness control (0.55mm ±0.02mm) and heavier PVC layer on top, giving better abrasion resistance. Dip‑coated fabrics often have thinner coating that wears faster.
2	1000D high‑tenacity polyester scrim – Balanced with 18×18 or 20×20 yarn density. Tear strength ≥260 N (DIN 53363). Withstands the constant stress of inflation and children jumping.
3	🔥 Batch‑unique fact – Batch #BV‑0626‑03 (June 2026). Dynamic air pressure + UV combo test: A 1m² sample of PVC Inflatable Vinyl 0.55mm 1000d was inflated to 5 psi and simultaneously exposed to 500 hours of UV (ASTM G154). After the test, no seam leakage, and tensile strength retention was 93% (original 3200N → 2976N). Most competitors' fabrics drop below 85% after 300 hours. This combined UV‑pressure test is unique to this batch. Report available.
4	Customizable properties – Add flame retardant (NFPA 701), anti‑static, anti‑mildew, or PVDF surface treatment for easy cleaning. We produce in‑house, so we can adjust additives per your requirement.
5	Proven for bouncy castles & water bladders – Used by inflatable manufacturers in Europe and Australia. The welded seam strength (using hot air or RF welding) is ≥300 N/50mm – critical for long‑term air retention

Customer Question Mapping (People also ask)

"How does PVC Inflatable Vinyl 0.55mm 1000d compare to 0.45mm material?"
→ 0.55mm is 22% thicker, giving significantly better puncture resistance and air retention. For commercial bouncy castles that see daily use, we always recommend 0.55mm or higher. 0.45mm is fine for occasional home use.

"Can I use this fabric for a water bladder (liquid storage)?"
→ Yes. PVC is non‑toxic and waterproof. The knife‑coated surface has no pin‑holes. For potable water, we can supply food‑grade PVC compound (FDA compliant). Let us know.

"What's the minimum order quantity for this PVC Inflatable Vinyl 0.55mm 1000d?"
→ 500 linear metres (roll width up to 2.0m). For smaller quantities, we may have stock offcuts – please inquire.

"Does it have flame retardant certification for bounce houses in the EU?"
→ Yes, we can meet DIN 4102 B1 or EN 13501‑1 B‑s2,d0. The FR additive is reactive (non‑migrating). Please specify when ordering.

"What welding method do you recommend?"
→ High‑frequency (RF) welding gives the strongest seam. Hot air welding is also acceptable. We can supply welding parameter guides for your factory.

For bouncy castle and inflatable manufacturers, material consistency is everything. Our PVC Inflatable Vinyl 0.55mm 1000d is batch‑tested for tensile strength, UV resistance, and air‑holding. We supply over 500,000 m² of inflatable‑grade fabric each month. Request a free A4 sample from batch #BV‑0626‑03 – weld it, test it, and compare with what you're using now.