High Stretch Waterproof PVC Coated Canvas
video
High Stretch Waterproof PVC Coated Canvas

High Stretch Waterproof PVC Coated Canvas

Product Name: High Stretch Waterproof PVC Coated Canvas Yarn & Density: 2000D × 2000D polyester, 30×30 threads/inch Weight Range: 400 – 2100 g/m² (customizable) Tensile Strength (Warp / Weft): ≥4500 N/5cm / ≥4200 N/5cm Tear Strength: ≥700 N (DIN 53363) Surface Finish: PVDF + acrylic top coat (self-cleaning, anti-UV) Standard Width: Up to 5.0 meters Flame Retardant: Optional (NFPA 701, B1, M2)

Product Introduction

In inflatable bounce houses, stretch tents, or truck side curtains that undergo repeated tension cycles, standard PVC coated fabrics often fail by yarn slippage, coating delamination, or sudden tearing - creating safety hazards and equipment downtime. We tested 9 fabrics labelled 'high‑stretch' (700–900 g/m²) under 2,000 dynamic fatigue cycles: 6 of them lost >35% of their original tensile strength, and 3 showed visible delamination between scrim and coating, far below the requirements for inflatable structures.

The JLINDUSTRY‑PRO 2000 uses 2000D × 2000D high‑tenacity polyester yarns with a 30×30 threads/inch ultra‑dense weave, combined with German high‑molecular‑weight plasticisers. Warp tensile strength reaches 4500 N/5cm, weft 4200 N/5cm; tear strength hits 700 N (DIN 53363) - 56% higher than ordinary fabrics of the same weight. A PVDF acrylic top coat delivers self‑cleaning and UV resistance, surviving 100,000 dynamic bends without cracks. An independent CNAS lab report shows that after 20,000 reciprocating stretch cycles (simulating 3 years of inflatable use), tensile strength retention remains 92%."
product-1000-1384
Five key selling points
1.Ultra‑dense weave structure – 1000D×1000D or 2000D×2000D polyester filament, density options: 9×9, 14×14, 18×16, 20×20, 30×30 (top grade). Weight range 400‑2100 g/m². Compared to ordinary 18×18 / 650 g/m² fabric, 30×30 increases tear strength by 120%.
2. High‑stretch fatigue‑resistant formulation – PVC compound modified with polyester elastomers; elongation at break 6‑10%, recovery rate ≥95%. PVDF + acrylic top coat: self‑cleaning, graffiti resistance. After 1500h xenon arc aging (ASTM G155), tensile strength retention ≥90%. Outdoor service life >10 years.

product-1060-1060product-1060-1060

3.🔥 Batch‑unique fact – Coupled test: 500h at 70°C / 95% RH (heat & humidity) + 20,000 reciprocating stretch cycles. Post‑test tear strength still 620 N (88.6% of original 700 N), zero delamination. This combined heat‑humidity‑fatigue data is available only for this batch with CNAS test report.
4.End‑to‑end in‑house production – From polyester knitting (Italian Karl Mayer looms) to PVC calendering (German raw materials) to coating – all inside. No purchased greige fabric, ensuring batch‑to‑batch variation <2%. Adhesion strength ≥120 N/5cm (DIN 53357).
product-1060-1060
product-1060-1060
5.Wide width + high‑frequency welding – Maximum width 5.0 metres to reduce seams. Hot‑air welded seam peel strength ≥300 N/50mm. Optional flame retardant upgrades (NFPA 701, B1, M2) meet US/European safety standards for amusement equipment.
product-1060-1060

3. Customer question mapping (People also ask)

"Our inflatable bouncer gets bubbles and delamination after 6 months – is there a truly fatigue‑resistant fabric?"
→ HS‑PRO 2000 passed 20,000 dynamic stretch cycles . Adhesion remains >110 N, no bubbles, no yarn slippage. We can supply the fatigue test video and a sample from the same batch.

"I need fabric with 5‑8% elastic elongation without losing tear strength."
→ By adjusting twist and plasticiser, we achieve 6‑8% elongation with >95% recovery. Tensile strength remains >4200 N – ideal for elastic tents and inflatable arches.

"Does PVDF coating really make truck tarps easy to clean?"
→ PVDF surface energy is only 22 mN/m; mud and oil roll off. A standard pressure washer restores a like‑new finish. Anti‑soiling performance is 3x better than standard acrylic coatings.

"Can you make 5‑metre wide seamless fabric for a water park inflatable platform?"
→ Yes, maximum width 5.0 metres (4.9 m usable). We also provide on‑site high‑frequency welding guidance; seam strength ≥300 N/50mm, fully airtight.

"We export to Europe – need EN 13501‑1 B‑s1,d0 and REACH compliance."
→ Our upgraded FR system reaches B‑s1,d0 (low smoke, no flaming droplets). All raw materials comply with REACH and RoHS. We issue a full declaration.

product-1060-1060

Our Workshop:
product-1000-1385
product-1000-1384
product-1000-1385

"Above Is The Technical Summary For The JLINDUSTRY High‑Stretch Series.
Above Is The Technical Summary For The High-Stretch Series. For More Detailed Specifications Of Other Products, Please Click On This Item:Coated Laminated Tarp
5. Internal links (already indexed by Google – complementary products)

UV Resistant Vinyl Fabric
Durable PVC Truck Tarpaulin
Strength PVC Vinyl Fabric
Waterproof Flame Tarpaulin
Waterproof Tent Fabric Coated Tarpaulin

Hot Tags: high stretch waterproof pvc coated canvas, China high stretch waterproof pvc coated canvas manufacturers

Previous: No Information

You Might Also Like

(0/10)

clearall